Siemens introduces intelligent link module to enhance data transparency in industrial applications
SIRIUS 3RC7 ILM
Field components can be seamlessly integrated into the automation system
Diagnostics facilitate detection of faults, anomalies, and maintenance needs, enabling preventive maintenance
With the SIRIUS 3RC7 Intelligent Link Module (ILM), Siemens now offers a fast and easy way to achieve full data transparency down to the field level by making conventional motor starters intelligent. This plug-and-play extension module combines Information Technology (IT) and Operational Technology (OT) with minimal installation and commissioning effort. This allows the data available from field devices to be efficiently utilized.
As part of Siemens' leading automation concept, the TIA Portal, the 3RC7 ILMs are seamlessly integrated into existing automation environments. 3RC7 is part of the comprehensive SIRIUS portfolio for industrial control gear.
SIRIUS Control goes digital!
With the SIRIUS 3RC7 ILM, you can integrate the load via the motor starter directly into the automation system. It offers a new level of transparency. Measurement values are immediately available, as are real-time status messages and integrated diagnostics. This extension module turns a conventional motor starter into an intelligent one. It enables communication and parameterization across the SIRIUS portfolio. The intelligent motor starter can thus not only protect and switch but also measure, monitor, control, and report.
Highlights
- Control, protect, monitor, and measure with a single module!
- Diagnostics fully integrated into SIMATIC
More than just a link module
The SIRIUS 3RC7 ILM connects the standard 3RT2 contactor and standard 3RV2 motor protection circuit breaker both electrically and mechanically, in sizes S00 and S0 with spring-loaded terminals (up to 15kW/400V AC). The electronic overload protection, configurable via software, has a setting range of 0.4 to 32 A. With the 3RC7 ILM, you gain direct insight into the status of the load through information such as current, voltage, power, and phase asymmetry. Additionally, relevant data on operating hours, number of switching cycles, and overload trips are available for effectively scheduling timely maintenance of the connected device or system.
SIRIUS 3RC7 ILM becomes one with SIMATIC
Thanks to full integration into the TIA Portal, users receive real-time status information within their operator interface, allowing quick identification of bottlenecks. This prevents downtime and increases system availability. The SIRIUS 3RC7 intelligent link modules integrate perfectly into the compact SIMATIC ET 200SP I/O system and other common automation systems. Up to 16 loads can be connected per bus adapter, benefiting from easy commissioning, scalability, and maximum flexibility provided by the SIMATIC ET 200SP system. Module addressing is not required, and component replacement does not require a laptop or PC.
Stay up to date with the latest news:
-
Siemens - Scalable and Flexible Safety ConceptsRead moreSiemens offers a digital workflow that helps with every step of safe machine design. Through an integrated tool chain-from risk assessment and safety evaluation to hardware selection, engineering and validation-the process is streamlined and documentation efforts are minimised.
-
News - Siemens - SIRIUS 8WD46 signal columnRead moreHigh system availability and efficient engineering with this flexible signal column. Each segment individually configurable. Siemens has further expanded its portfolio of SIRIUS 8WD4 signal columns with a new high-performance signal column, which is electronically configurable as standard. Making it particularly easy to adapt to individual application requirements.
-
Siemens - TIA Portal V20Read moreSiemens introduces TIA Portal Version 20, a major upgrade to the Totally Integrated Automation (TIA) Portal. This latest version offers numerous new functionalities, and the accompanying hardware portfolio has been significantly expanded and optimized.
-
Siemens - ET 200SPRead moreNo matter the task—switching or controlling, starting or monitoring—the powerful Simatic ET 200SP motor starter offers versatile functionality while taking up minimal space. The Simatic ET 200SP motor starters are available in standard and failsafe variants. They switch and protect electrical loads up to 5.5 kW in various applications, such as logistics systems and production machinery. With a combination of compact design and hybrid switching technology in five power variants, the motor starter delivers exceptional performance.
Check out our other success stories:
-
TR Service - Future-proof low-voltage panelRead moreTR-Service provides industrial maintenance using all disciplines, from electrical and mechanical to hydraulic and pneumatic. With support from Breemes, the company installed a large low-voltage panel. ‘After discussing my summary plan with them, I decided to just do it,’ says director-owner Raoul Tielens. At Breemes' suggestion, the panel was future-proofed by preparing it for power monitoring.
-
Peeters - Young Company, New EquipmentRead moreSince its founding a few years ago, Peeters Robotic Solutions has been rapidly developing, working on projects both domestically and internationally and providing standard solutions for industrial palletizing. The company stays up to date with the latest technology, including Festo’s electrical and pneumatic drives. To achieve this, it relies on itsme. “Thanks to their expertise and skills, we can bring innovation to the forefront for our customers.”
-
Kusters - Putting weight behind itRead moreKusters was looking for a weighing solution for its banknote devaluation machines that was easy to integrate into the Siemens control system. Through itsme, they came into contact with the right knowledge carriers at Siemens. ‘For us as Kusters, itsme is not only a supplier but also a source of knowledge, with which we co-engineer certain components and process steps, such as this weighing system.’
-
Eneco - Green light for green electricity and steamRead moreEneco Bio Golden Raand, located in the port area of Delfzijl, converts biomass into green electricity and green steam. Each year, the plant processes approximately 300,000 tons of waste wood from the Netherlands and neighboring countries. As part of Eneco’s climate ambitions, a project began in 2022 to replace the existing fluorescent lighting in and around the boiler room. The project was carried out under the supervision of itsme. “Two factors were important in this process: the cost, of course, but also the level of service.”
Why not take a look at these trainings we offer:
-
PROFINET CPNERead moreavailable in Dutch
-
PROFIBUS CPERead moreavailable in Dutch
-
WinCC-SCADA2Read moreavailable in Dutch
-
PCS7-SAFE V9Read moreavailable in Dutch