Schneider Electric - ClimaSys: prevent downtime and contribute to a better climate
Downtime is often caused by overheating. With good cabinet climate control, you can prevent this. In addition, good climate control ensures a sustainable solution. It has been shown that components last up to two times longer at the right operating temperature.
Prevention of failures
Ensuring continuity and increasing productivity are often goals of factories. This comes down to preventing breakdowns that can lead to downtime. Proper climate control within the cabinet is essential here. If components overheat, this can lead to downtime or shortened service life. Downtime is often caused by overheating. You can prevent this with proper temperature management. Want to make the right choices when it comes to climate control?
Sustainability
Did you know that with proper climate control, you are doing your part to ensure sustainability? Components have been shown to last up to two times longer at the right operating temperature. If certain components such as a variable speed drive become 10 degrees Celsius too hot then the service life can be halved. By extending the service life of costly components, you are contributing to the climate and to your own wallet.
Polluted environments
In certain industrial segments, you often have to deal with polluted environments. With an air to air exchanger, Schneider Electric ensures that contaminated air does not enter the cabinet and cannot cause damage. With a calculation in ProClima, they can select the right cooling system.
ClimaSys Smart Ventilation System
When an enclosure is in a greasy or dusty environment, filters can become clogged. This causes reduced ventilation with a risk of overheating. To prevent this, Schneider Smart ventilation CSVS fans can be installed with an LED indicator and a dry contact to the PLC. This allows you to see when a filter mat is clogged and replace it in time.
Condensation and dew point measurement
One of the reasons for corrosion is condensation. In case of corrosion, a dew point measurement can be done with a data logger. With a heating mat, condensation can be kept outside the cabinet. In addition, the IP value can be checked, this is part of a Quick Scan.
Quick scan
In practice, sometimes extensions are made or there are things that were not taken into account in the design. For example, heat dissipation may be higher than expected or the cabinet arrangement may be different than planned. Schneider's Sales Specialists can do a quick scan on site to identify possible causes of failure due to overheating.
Stay up to date with the latest news:
-
Schneider Electric - Schneider Electric – Harmony Tower LightsRead moreThe comprehensive Harmony signaling range from Schneider Electric includes a variety of beacons, tower lights, and multi-tone sounders. These signaling devices feature status indication, voice guidance, and configurable light and sound patterns to provide timely alerts for faults and abnormal conditions. They are known for easy installation, low maintenance, and high protection rating.
-
Schneider Electric - New offer Soft StartersRead moreWith the introduction of the new Altivar Soft Starter ATS480 series in 2023 as a replacement for the Altivar ATS48, and the launch of the new Altivar Soft Starter ATS130 in 2024, Schneider Electric expands its Soft Starter portfolio once again in 2025 with the new ATS430 and ATS490.
-
Schneider Electric - Modicon Edge I/O NTSRead moreModicon Edge I/O NTS, Schneider Electric’s latest IP20 distributed I/O system, is more than just an input/output system. It is designed to equip machine builders, system integrators, and industrial end-users with the tools they need to thrive in an increasingly data-driven digital world. The system's ability to aggregate and securely share data enables smarter decision-making and improved operational performance. With open Ethernet protocols for connectivity with a wide variety of devices and architectures, OPC UA technology for secure communication and interoperability, and built-in hardware cybersecurity, Modicon Edge I/O NTS helps ensure connectivity, performance, availability, and enhanced network security. Furthermore, the system complies with current cybersecurity regulations, enabling end-users to safely access and fully leverage their data — boosting industrial efficiency, flexibility, sustainability, and profitability.
-
Schneider Electric - Software-defined automationRead moreSoftware-defined Automation (SDA) is a new approach to industrial automation that uses software to control, manage and optimize automation processes instead of the traditional “hardware-first” approach to automation.
Check out our other success stories:
-
Sekisui AlveoRead moreFoam producer Sekisui Alveo has a large factory in Roermond. To support production and maintenance, warehouses and distribution points with thousands of different items are spread across the various halls. Think spare parts, personal protection equipment and consumables. The company cooperates intensively with itsme for management, such as recently with the step-by-step introduction of vendor managed inventory (VMI) for the grab stock of mechanical items.
-
IECRead moreTo control the expansion of a silo park, engineering & construction company IEC called on Breemes. Being involved in the engineering from the beginning, the electrical service provider was able to make smart proposals for both the low-voltage part and the PLC control. ‘We have always been able to find each other well and when changes occurred, we were quickly on the same page with Breemes.’
-
Heliox - Charged for DeliveryRead moreHeliox, a developer and manufacturer of charging systems for electric buses and trucks, was already working with itsme when production still took place in the Netherlands. Today, production has shifted to Slovakia, Portugal, and Moldova, and is also happening in the US. itsme remains the “irreplaceable” partner for the supply of electrical components and cable harnesses.
-
BLOK System SupplyRead moreBlok System Supply and itsme have maintained an intensive relationship for many years. Early last year, this was further deepened with electronic data exchange via the Smart Connected Supplier Network. ‘It saves an enormous amount of time and reduces errors. We always have real-time information automatically.’ However, time for personal contact is not saved. ‘That is precisely what makes itsme a very nice party to work with.’
Why not take a look at these trainings we offer:
-
PROFINET CPNERead moreavailable in Dutch
-
PROFIBUS CPERead moreavailable in Dutch
-
WinCC-SCADA2Read moreavailable in Dutch
-
PCS7-SAFE V9Read moreavailable in Dutch