text.skipToContent text.skipToNavigation


Yes we can....with Phoenix 
 


For machine and plant manufacturers who export their products to North America or wish to put them into circulation within the area of application, the laws and regulations applicable there apply. One of the most important industry-specific standards besides the NEC is NFPA 79. NFPA 79 is revised every three years, following the NEC, and adopts its innovations.

Find out what requirements electrical equipment must meet under NFPA 79 for the use of surge protection modules (SPDs). Play it safe with us.

The applicable edition is determined by the state in which the machine is used. As a result, different editions are valid throughout North America. It is therefore recommended that you always take note of the most recent edition.








NFPA 79 - Edition 2021

  • Overvoltage protection is mandatory for industrial machines with safety-related circuits that are not yet adequately protected against overvoltages.
  • Surge protection modules (SPD) must be UL listed.
  • An SPD type 4 in the switch cabinet must correspond to the type of location of the machine and be marked accordingly.
  • An SPD type 4 may only be installed by the control cabinet manufacturer.
     

NFPA 79 - 2018 Edition

  • Overvoltage protection is mandatory for industrial machines with safety-related circuits (Safety).
  • Surge protection modules (SPD) must be UL registered.
  • An SPD type 4 in the control cabinet must correspond to the type of location of the machine and must be marked.


     


Our solution - your benefits

  • VAL-US products are UL-Listed and can be universally applied to all site types
  • No exceeding of the short-circuit current due to a high short-circuit resistance of 200 kA
  • Simplified installation inspection by inspectors as regulations in accordance with NFPA 79 are complied with
  • Products available throughout Europe, can be used and installed due to CE marking


Download the guideline here

 
 
 
 

Stay up to date with the latest news:

  • NEWS
    28 mei 2025
    OBO Bettermann - Industrial solutions
    Efficiency and safety are essential in industrial environments. That’s why OBO offers a wide range of products perfectly suited for industrial applications, including X-series junction boxes, LK4/LKV wiring ducts, and tension wire cable trays.
    Read more
  • NEWS
    26 mei 2025
    3M - Cubitron 3 Grinding and Cut-Off Wheels
    For over 40 years, 3M™ Cubitron™ Performance abrasives have been known for delivering high productivity. With the introduction of 3M™ Cubitron™ 3 Performance abrasives, a new generation of products is now available. This updated line features advanced technology with precisely shaped grains, offering up to three times the lifespan and increased cutting speed compared to previous versions.
    Read more
  • NEWS
    23 mei 2025
    JC - Electronics - Why Replacement Isn’t Always the Best Choice for Established Production Lines
    A production line that runs reliably and fits seamlessly into your process doesn’t necessarily need full replacement when parts become scarce. Modernization is often considered when electronics age, but it’s not always required.
    Read more
  • NEWS
    21 mei 2025
    Have Digitap - Fluke
    Fluke is globally recognized as a leading manufacturer of high-quality test instruments, trusted by professionals across sectors such as electrical engineering, industrial maintenance, and installation technology. Thanks to their reliability, accuracy, and durability, Fluke tools are an essential part of every technician’s toolkit.
    Read more

Check out our other success stories:

  • TESTIMONIAL
    2 apr. 2025
    TR Service - Future-proof low-voltage panel
    TR-Service provides industrial maintenance using all disciplines, from electrical and mechanical to hydraulic and pneumatic. With support from Breemes, the company installed a large low-voltage panel. ‘After discussing my summary plan with them, I decided to just do it,’ says director-owner Raoul Tielens. At Breemes' suggestion, the panel was future-proofed by preparing it for power monitoring.
    Read more
  • TESTIMONIAL
    19 feb. 2025
    Peeters - Young Company, New Equipment
    Since its founding a few years ago, Peeters Robotic Solutions has been rapidly developing, working on projects both domestically and internationally and providing standard solutions for industrial palletizing. The company stays up to date with the latest technology, including Festo’s electrical and pneumatic drives. To achieve this, it relies on itsme. “Thanks to their expertise and skills, we can bring innovation to the forefront for our customers.”
    Read more
  • TESTIMONIAL
    26 dec. 2024
    Kusters - Putting weight behind it
    Kusters was looking for a weighing solution for its banknote devaluation machines that was easy to integrate into the Siemens control system. Through itsme, they came into contact with the right knowledge carriers at Siemens. ‘For us as Kusters, itsme is not only a supplier but also a source of knowledge, with which we co-engineer certain components and process steps, such as this weighing system.’
    Read more
  • TESTIMONIAL
    22 nov. 2024
    Eneco - Green light for green electricity and steam
    Eneco Bio Golden Raand, located in the port area of Delfzijl, converts biomass into green electricity and green steam. Each year, the plant processes approximately 300,000 tons of waste wood from the Netherlands and neighboring countries. As part of Eneco’s climate ambitions, a project began in 2022 to replace the existing fluorescent lighting in and around the boiler room. The project was carried out under the supervision of itsme. “Two factors were important in this process: the cost, of course, but also the level of service.”
    Read more

Why not take a look at these trainings we offer: