Phoenix - Functional expansion of PLCnext controllers with a left-side safety module
An efficient solution for distributed safety applications
The AXC F XT SPLC 1000 - SPLC 1000 for short - has been developed as a dedicated safety controller that is primarily used in a distributed safety system. The new module uses the black channel principle to communicate with other Profisafe devices. This safety controller can be seamlessly integrated into the PLCnext-Technology open ecosystem.
Use to the highest safety level
The SPLC 1000 is a full-fledged safety controller that meets the highest safety level (SIL 3 and PL e respectively). The SPLC contains two separate and distinct processors based on the ARM Cortex M4 architecture. The SPLC 1000 is ideally suited for the implementation of smaller distributed applications. The SPLC 1000 can operate up to 32 Profisafe devices.
Simultaneous execution of different communication paths
Although the computational intensity is decreasing in a distributed application, it is becoming increasingly important to manage additional communication paths. This is the main reason why the SPLC 1000 supports Profisafe. The SPLC can simultaneously assume both the role of Profisafe controller (F-Host) and F-Device
Simpler programming with one unified engineering tool
Due to the small width of 45 mm for the SPLC 1000, in combination with the AXC F 2152 you have a full-fledged safety control system only 90 mm wide. Moreover, the whole is fully programmable with one programming package PLCnext Engineer. Code for the AXC F 2152 can be programmed both in IEC 61131-3 and in a higher programming language. In addition, we use the same tool to also build the safety software from standard safety blocks or in Safe-C. The safety and control software are in one project.
Stay up to date with the latest news:
-
Eaton - PSG and PSL power suppliesRead moreEaton is launching its next-generation PSG and PSL power supplies, specially designed to serve a wide range of industrial applications. The new PSG and PSL power supplies are flexible, reliable and economical. Thanks to their compact housing, you save valuable space in your control cabinet.
-
Festo - Save energy, increase productivityRead moreBecause pneumatics has a high power density, pneumatic components are widely used in machine lines. Smaller components are gaining popularity due to ease of use, energy savings and productivity gains.
-
Siemens - Scalable and Flexible Safety ConceptsRead moreSiemens offers a digital workflow that helps with every step of safe machine design. Through an integrated tool chain-from risk assessment and safety evaluation to hardware selection, engineering and validation-the process is streamlined and documentation efforts are minimised.
-
Schneider Electric - Modicon Edge I/O NTSRead moreModicon Edge I/O NTS, Schneider Electric’s latest IP20 distributed I/O system, is more than just an input/output system. It is designed to equip machine builders, system integrators, and industrial end-users with the tools they need to thrive in an increasingly data-driven digital world. The system's ability to aggregate and securely share data enables smarter decision-making and improved operational performance. With open Ethernet protocols for connectivity with a wide variety of devices and architectures, OPC UA technology for secure communication and interoperability, and built-in hardware cybersecurity, Modicon Edge I/O NTS helps ensure connectivity, performance, availability, and enhanced network security. Furthermore, the system complies with current cybersecurity regulations, enabling end-users to safely access and fully leverage their data — boosting industrial efficiency, flexibility, sustainability, and profitability.
Check out our other success stories:
-
TR Service - Future-proof low-voltage panelRead moreTR-Service provides industrial maintenance using all disciplines, from electrical and mechanical to hydraulic and pneumatic. With support from Breemes, the company installed a large low-voltage panel. ‘After discussing my summary plan with them, I decided to just do it,’ says director-owner Raoul Tielens. At Breemes' suggestion, the panel was future-proofed by preparing it for power monitoring.
-
Peeters - Young Company, New EquipmentRead moreSince its founding a few years ago, Peeters Robotic Solutions has been rapidly developing, working on projects both domestically and internationally and providing standard solutions for industrial palletizing. The company stays up to date with the latest technology, including Festo’s electrical and pneumatic drives. To achieve this, it relies on itsme. “Thanks to their expertise and skills, we can bring innovation to the forefront for our customers.”
-
Kusters - Putting weight behind itRead moreKusters was looking for a weighing solution for its banknote devaluation machines that was easy to integrate into the Siemens control system. Through itsme, they came into contact with the right knowledge carriers at Siemens. ‘For us as Kusters, itsme is not only a supplier but also a source of knowledge, with which we co-engineer certain components and process steps, such as this weighing system.’
-
Eneco - Green light for green electricity and steamRead moreEneco Bio Golden Raand, located in the port area of Delfzijl, converts biomass into green electricity and green steam. Each year, the plant processes approximately 300,000 tons of waste wood from the Netherlands and neighboring countries. As part of Eneco’s climate ambitions, a project began in 2022 to replace the existing fluorescent lighting in and around the boiler room. The project was carried out under the supervision of itsme. “Two factors were important in this process: the cost, of course, but also the level of service.”
Why not take a look at these trainings we offer:
-
PROFINET CPNERead moreavailable in Dutch
-
PROFIBUS CPERead moreavailable in Dutch
-
WinCC-SCADA2Read moreavailable in Dutch
-
PCS7-SAFE V9Read moreavailable in Dutch