text.skipToContent text.skipToNavigation
 

JC-Electronics – Why Replacement Isn’t Always the Best Choice for Established Production Lines


A production line that runs reliably and fits seamlessly into your process doesn’t necessarily need to be fully replaced when parts become scarce. Modernization is often considered when electronics become outdated, but it’s not always required.


The Reality: Production Lines Remain Operational for Years

In the industrial sector, long-term use is more the norm than the exception. In the Netherlands and Belgium, the average age of machinery is around 20 years. Elsewhere, production lines often remain active for 15 to 25 years. They operate reliably, are well-integrated into processes, and remain economically viable.


Replacement Is Disruptive and Expensive

When maintenance increases and parts become harder to find, replacement may seem like the logical step. Machines become outdated, suppliers discontinue support, and critical components may no longer be available. In such cases, it’s tempting to switch to a completely new production line. But that step is drastic. New lines often require multi-million-euro investments, extensive engineering projects, workplace redesign, and operator training. On top of that, there’s the temporary production downtime—with all the consequences that has for delivery reliability and customer commitments. The impact is significant and often underestimated.


The Alternative: Repair and Refurbishment

Industrial electronics can often be effectively repaired or replaced with refurbished parts. Through our partnership with JC-Electronics, itsme offers a reliable alternative. JCertified electronics are professionally overhauled, tested according to OEM specifications, and fitted with new components—backed by a two-year warranty.


JCertified: Reliability You Can See

Refurbished parts are easily identifiable by the purple JCertified seal. They meet high quality standards, and the refurbishment process is DEKRA-certified and compliant with the RecQ quality label. With repair and refurbishment via JC-Electronics, you can keep your operations running without major investments or downtime—giving you full control over processes and costs, even with aging systems.


Check out our other success stories:

  • TESTIMONIAL
    2 apr. 2025
    TR Service - Future-proof low-voltage panel
    TR-Service provides industrial maintenance using all disciplines, from electrical and mechanical to hydraulic and pneumatic. With support from Breemes, the company installed a large low-voltage panel. ‘After discussing my summary plan with them, I decided to just do it,’ says director-owner Raoul Tielens. At Breemes' suggestion, the panel was future-proofed by preparing it for power monitoring.
    Read more
  • TESTIMONIAL
    19 feb. 2025
    Peeters - Young Company, New Equipment
    Since its founding a few years ago, Peeters Robotic Solutions has been rapidly developing, working on projects both domestically and internationally and providing standard solutions for industrial palletizing. The company stays up to date with the latest technology, including Festo’s electrical and pneumatic drives. To achieve this, it relies on itsme. “Thanks to their expertise and skills, we can bring innovation to the forefront for our customers.”
    Read more
  • TESTIMONIAL
    26 dec. 2024
    Kusters - Putting weight behind it
    Kusters was looking for a weighing solution for its banknote devaluation machines that was easy to integrate into the Siemens control system. Through itsme, they came into contact with the right knowledge carriers at Siemens. ‘For us as Kusters, itsme is not only a supplier but also a source of knowledge, with which we co-engineer certain components and process steps, such as this weighing system.’
    Read more
  • TESTIMONIAL
    22 nov. 2024
    Eneco - Green light for green electricity and steam
    Eneco Bio Golden Raand, located in the port area of Delfzijl, converts biomass into green electricity and green steam. Each year, the plant processes approximately 300,000 tons of waste wood from the Netherlands and neighboring countries. As part of Eneco’s climate ambitions, a project began in 2022 to replace the existing fluorescent lighting in and around the boiler room. The project was carried out under the supervision of itsme. “Two factors were important in this process: the cost, of course, but also the level of service.”
    Read more

Stay up to date with the latest news:

  • NEWS
    19 jun. 2025
    ABB - AF magnetic switches
    The advanced technology of the AF magnetic switches bridges voltage dips and peaks, ensuring that the magnetic switch continues to function consistently and reliably. This prevents downtime and guarantees the continuity of business processes. The integrated surge protection also eliminates the need for external protection, saving space and costs and ensuring clarity in the control cabinet.
    Read more
  • NEWS
    18 jun. 2025
    Eaton - P1-40 load break switches
    Eaton's P1-40 load break switches bridge the gap between the maximum rated value of the previous P1 (32 A) and the lowest rated value of the existing P3 (63 A). This allows for a higher rated current in the compact format of the P1. The new P1-40 line is the ideal solution for machine control, automation, production lines, emergency shutdowns and main switches.
    Read more
  • NEWS
    17 jun. 2025
    Pilz - PSENopt en PSENopt II
    Pilz's PSENopt and PSENopt II safety light curtains protect employees and production goods in a safe, efficient and economical manner. An invisible infrared protective field protects the danger zones and enables optimum access protection.
    Read more
  • NEWS
    16 jun. 2025
    Schneider Electric - TeSys Deca Advanced
    TeSys Deca Advanced is the latest generation of high-performance contactors with an electronic coil and a wide AC/DC control voltage range to reduce energy consumption during the product's lifetime. TeSys Deca Advanced offers best-in-class reliability and improved electrical performance for a longer lifetime, especially for heavy-duty applications or demanding conditions.
    Read more

Take a look at these promotions:

Why not take a look at these trainings we offer: