Festo – Smart Connectivity
Integrating a servo system is no longer just about mechanical or electrical connections. Smart connectivity is becoming increasingly important: how do you ensure the system works seamlessly with your PLC environment? With the multiprotocol CMMT-AS servo drive, Festo makes this integration easier than ever.
A servo system consists of four main components: the mechanical axis, the gearbox, the servo motor, and the servo drive that controls the motor. For optimal performance, these components must be perfectly matched. Since all these parts influence each other, selecting and dimensioning a system is often a complex puzzle.
That’s why Festo supports engineers with a powerful online tool: Electric Motion Sizing. This tool helps you quickly and intuitively define the specifications for your application. Based on your input, the tool automatically suggests suitable combinations. Filters allow you to refine your selection until you find the most appropriate solution.
In addition to precise sizing, the tool also provides a complete Bill of Materials, including all required mounting components, a detailed calculation report, and a parameter file that can be used directly during system commissioning.
Mechanical connectivity is also well taken care of. Festo’s tool enables the configuration of a complete drive system – even for multi-axis applications. All necessary mounting materials are included automatically, saving both time and costs.
For the electrical connection, Festo offers practical One Cable Technology, allowing you to combine power and data in a single cable. This makes cabling more straightforward and faster.
Finally, there’s intelligent connectivity: the communication between the servo drive and the controller. The CMMT-AS servo drives support various fieldbus protocols such as ProfiNet, EtherCAT, Ethernet/IP, and Modbus, making them easy to integrate into a wide range of automation environments.
Stay up to date with the latest news:
-
Schneider Electric - Simplified wiringRead moreThanks to intuitive spring clips, TeSys Deca Snap-In enables contactors and motor protection switches to be connected in just two seconds per wire. That is up to 96% faster than traditional connection methods.
-
nVent ERIFLEX -Distribution blocksRead morenVent ERIFLEX distribution blocks: ideal for connecting the power cable or output of machines or industrial equipment (such as inverters, air conditioners, etc.) and offering high short-circuit resistance, time savings and reliability in every switch cabinet.
-
Eaton - S711 softstarterRead moreThe S711 sets new standards in soft start technology. This brand new soft starter is not only smarter and more powerful, but also equipped with advanced control and protection functions. In addition, it introduces a groundbreaking service interface based on Bluetooth LE (Low Energy).
-
Eaton - Eaton – Ultra-Compact DM1 General Purpose DrivesRead moreEaton’s PowerXL DM1 variable frequency drives deliver maximum functionality in an ultra-compact housing, making them ideal for applications with limited installation space. Despite their small size, they offer the full capabilities of a universal drive, including pump and HVAC settings as well as control of both conventional asynchronous and PM motors.
Check out our other success stories:
-
Sekisui AlveoRead moreFoam producer Sekisui Alveo has a large factory in Roermond. To support production and maintenance, warehouses and distribution points with thousands of different items are spread across the various halls. Think spare parts, personal protection equipment and consumables. The company cooperates intensively with itsme for management, such as recently with the step-by-step introduction of vendor managed inventory (VMI) for the grab stock of mechanical items.
-
IECRead moreTo control the expansion of a silo park, engineering & construction company IEC called on Breemes. Being involved in the engineering from the beginning, the electrical service provider was able to make smart proposals for both the low-voltage part and the PLC control. ‘We have always been able to find each other well and when changes occurred, we were quickly on the same page with Breemes.’
-
Heliox - Charged for DeliveryRead moreHeliox, a developer and manufacturer of charging systems for electric buses and trucks, was already working with itsme when production still took place in the Netherlands. Today, production has shifted to Slovakia, Portugal, and Moldova, and is also happening in the US. itsme remains the “irreplaceable” partner for the supply of electrical components and cable harnesses.
-
BLOK System SupplyRead moreBlok System Supply and itsme have maintained an intensive relationship for many years. Early last year, this was further deepened with electronic data exchange via the Smart Connected Supplier Network. ‘It saves an enormous amount of time and reduces errors. We always have real-time information automatically.’ However, time for personal contact is not saved. ‘That is precisely what makes itsme a very nice party to work with.’
Why not take a look at these trainings we offer:
-
PROFINET CPNERead moreavailable in Dutch
-
PROFIBUS CPERead moreavailable in Dutch
-
WinCC-SCADA2Read moreavailable in Dutch
-
PCS7-SAFE V9Read moreavailable in Dutch